MAAL-011181-DIE Datasheet | MACOM Technology Solutions

Features - 15 d B Gain - 2.5 d B Noise Figure - 29 d Bm Output IP3 - 5 V Drain Supply - Bare Die (3.45 x 1.304 mm) 4 mil thickness - Ro HS- pliant Applications - Multi Market - ISM Description The MAAL-011181-DIE is a wideband distributed low noise amplifier with an operating frequency range of 9 k Hz to 20 GHz. This LNA has a typical 2.5 d B noise figure, 15 d B gain, 29 d Bm OIP3, 19 d Bm P1d B and 21 d Bm P3d B. Only a single bias supply voltage of 5 V is required to bias the LNA. The typical current draw is 125 m A. No external matching ponents are required, but external biasing ponents are needed. Large capacitors for bypassing are required on CBIAS1 and CBIAS2 for low frequency operation. A DC blocking capacitor is required on the RF input. An RF choke and blocking capacitor should be added to the RF output pin to bias the amplifier. 5 V must be applied to VBIAS while VDD can vary. The MAAL-011181-DIE is designed for wideband low noise applications such as test equipment. It is available as a bare die. This LNA is also available in a 5 mm, 32 lead PQFN package under part number MAAL-011181. Block Diagram Rev. V3 3 2 1 6 7 8 11 10 Pin Configuration1,2 Pin # Pin Name Description 1,3,5,6,8,10 Ground RFIN RF Input CBIAS1 Bypass Capacitor 1 RFOUT/VDD RF Output/Voltage...