1 W Driver Amplifier with VG Enable
0.1 - 3.0 GHz
Gain: 24.5 dB
P-1dB: 29 dBm
PSAT: 30 dBm
PAE at PSAT: 40%
OIP3: 40 dBm
Typical bias conditions: 9 V, 265 mA
Fully matched output
Lead-Free 3 mm 16-LD PQFN package
Halogen-Free “Green” Mold Compound
16 15 14 13
The MAAP-011232 is a 2-stage power amplifier with
gain shut off, operating from 100 MHz to 3 GHz. For
operation in the 100 MHz to 1 GHz frequency range
no I/O matching is required. Internal DC blocking is
provided at the input, while the RF output port is DC
coupled through an external bias-tee. Bias current,
RF gain and output power are controlled with a gate
bias voltage (VG). Typical current consumption is
less than 300 mA at maximum output power.
The MAAP-011232 is well suited to both power and
driver requirements for multiple applications such as
LMR, Milcom, Sensors & Telemetry, Test &
Measurement and Satcom.
The MAAP-011232 is fabricated using a GaAs
D-mode high breakdown process which features full
passivation for increased performance and reliability.
9 - 12
Drain Voltage VD1
500 Piece Reel
14 RF Output and Drain Voltage VD2
1000 Piece Reel
Sample Board Type A
Sample Board Type B
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
16 Shut Off Voltage VG
3. MACOM recommends connecting unused package pins to
4. The exposed pad centered on the package bottom must be
connected to RF, DC and thermal ground.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit: