MAALSS0043 Datasheet | MACOM Technology Solutions

High Dynamic Range Low Noise Amplifier 800 - 1000 MHz Features - Low Noise Figure: 1.2 d B - High Input IP3: +18 d Bm at 8 V, 60 m A bias +6.5 d Bm at 3 V, 20 m A bias - High Gain: 16 d B - Single Supply: +3 to +8 VDC - Adjustable current: 20 to 80 m A with external resistor - Lead-Free SOIC-8 Package - 100% Matte Tin Plating over Copper - Halogen-Free “Green” Mold pound - 260°C Reflow patible - Ro HS- pliant Version of AM50-0003 Description M/A-’s MAALSS0043 is a high dynamic range, Ga As MMIC, low noise amplifier in a lead-free SOIC-8, surface mount plastic package. It employs external input matching to obtain optimum noise figure performance and operating frequency flexibility. The MAALSS0043 also Features flexible biasing to control the current consumption vs. dynamic range trade-off. The MAALSS0043 can operate from any supply voltage in the 3 V to 8 V range. Its current can be controlled over a range of 20 m A to 80 m A with an external resistor. The MAALSS0043 is ideally suited for use where low noise figure, high gain, high dynamic range, and low power consumption are required. Typical applications include receiver front ends in AMPS, GSM, and ETACS base stations. It is also useful as a gain block, buffer, driver, and IF amplifier in both fixed and portable cellular and 900 MHz ISM systems. The MAALSS0043 is fabricated using a low-cost 0.5-micron gate length Ga As process. The process Features full passivation for increased performance reliability. Ro HS pliant MAALSS0043 V2 Functional Block Diagram GND REXT RF IN GND GND VDD RF OUT GND Pin Configuration Pin No. Pin Name Description 1 GND RF and DC...