MA47223 Datasheet | MACOM Technology Solutions

Features  Broadband 50 Ohm Design Through X Band  High Power Handling  Voltage Ratings to 1000V  Fast Switching Speeds  Hermetically Sealed Package  Ro HS pliant Description These M/A- Technology Solutions switch modules consist of a shunt mounted, passivated, PIN diode chip in a hermetically sealed strip-line package. These modules are optimized for use in a 50 ohm micro-strip or strip-line circuit. By incorporating the appropriate series inductance to produce a matched low pass filter structure in a zero or reverse bias condition, no external matching is required. To achieve high isolation, a forward bias current between +10m A to +100m A is applied to the center conductor which changes the module’s inductive impedance from a high to a lowimpedance state causing the RF power to be reflected. Absolute Maximum Rating1 @ TA = +25°C (unless otherwise specified) Parameter Rating Voltage Voltage rating per pg. 2 table Operating Temperature - 65°C to +150°C Storage Temperature -65°C to +175°C Power Dissipation PDISS = 150°C -TAMBIENT Thermal Resistance 1. Operation of the device above any one of these parameters may cause permanent damage. Available Stripline Packages Applications The M/A- Technology Solutions MA47200 series modules maybe operated as a SPST reflective switch or as an attenuator by applying the appropriate forward or reverse DC bias. These broadband modules are designed to operate at frequencies from VHF through X Band. A variety of modules are available which offer a choice of breakdown voltages and switching speeds. ODS-144 ODS-114 Internal Wiring Diagram Specifications subject to change without prior notification. M/A- Technology Solutions Inc. (MA) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit .ma. for additional data sheets and product information. For further information and support please visit: https://.ma./support MA47200 Series Stripline PIN...