Datasheet4U Logo Datasheet4U.com

MAS9178 - Stand-alone am Receiver ic

Description

The MAS9178 AM-Receiver chip is a highly sensitive, simple to use AM receiver specially intended to receive time signals in the frequency range from 40 kHz to 100 kHz.

Only a few external components are required for time signal receiver.

Features

  • Highly Sensitive AM Receiver, 0.4 µVRMS typ. Wide Supply Voltage Range from 1.1 V to 3.6 V Very Low Power Consumption Power Down Control Fast Startup Only a Few External Components Necessary Control for AGC On Wide Frequency Range from 40 kHz to 100 kHz High Selectivity by Quartz Crystal Filter.

📥 Download Datasheet

Datasheet Details

Part number MAS9178
Manufacturer MAS
File Size 100.13 KB
Description Stand-alone am Receiver ic
Datasheet download datasheet MAS9178 Datasheet

📁 Similar Datasheet

  • MAS9171A - Octal Port Protecton (Micro Analog Systems)
  • MAS9181B - OCTAL 8 BIT TRIMMER IC (ETC)
  • MAS9181BN - OCTAL 8 BIT TRIMMER IC (ETC)
  • MAS9181CS - OCTAL 8 BIT TRIMMER IC (ETC)
  • MAS9184A - 12 X 8-bit D to A Converter (Micro Analog systems)
  • MAS9186 - 8 X 8-bit D to A Converter 3-pin Serial Data Interface Low Voltage Output Buffer (Micro Analog systems)
  • MAS9011 - Solar Cell Systems Manager IC (Micro Analog Systems)
  • MAS9078 - Stand-alone am Receiver ic (Micro Analog Systems)
  • MAS9079 - Stand-alone Tri Band Time Signal AM Receiver IC (Micro Analog Systems)
  • MAS9081 - Stand-alone Dual Band Time Signal AM Receiver IC (Micro Analog Systems)
Other Datasheets by MAS
  • MAS9179 - Stand-alone Tri Band Time Signal AM Receiver IC
  • MAS9116 - Stereo Digital Volume Control
  • MAS9138 - ASYNCHRONOUS TO SYNCHRONOUS CONVERTER
  • MAS9180 - AM Receiver IC
  • MAS9187 - 12 X 8-bit D to A Converter
  • MAS9188 - 12 X 8-Bit D to A Converter
  • MAS9191A - Single Chip AMPS/ETACS/NAMPS Audio/Data Processor
  • MAS9012 - Stepper Motor Driver IC

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com DA9178.000 22 Apr, 2003 MAS9178 AM Receiver IC • • • • • • • DESCRIPTION The MAS9178 AM-Receiver chip is a highly sensitive, simple to use AM receiver specially intended to receive time signals in the frequency range from 40 kHz to 100 kHz. Only a few external components are required for time signal receiver. The circuit has preamplifier, wide range automatic gain control, demodulator and output comparator built in. The output signal can be processed directly by an additional digital circuitry to extract the data from the received signal. The control for AGC (automatic gain control) can be used to switch AGC on or off if necessary. Unlike MAS1016A and MAS1016B, MAS9178 does not require AGC control procedure in WWVB and JJY systems.
Published: |