Datasheet4U Logo Datasheet4U.com

MP5014A - Programmable Current-Limit Switch

General Description

The MP5014A is a protection device designed to protect circuitry on the output (source) from transients on the input (VCC).

Also, it protects VCC from undesired shorts and transients coming from the source.

At start-up, the inrush current is limited by restricting the slew rate at the source.

Key Features

  • 10 V to 13.8 V Operating Input Range.
  • 15 V Typical Output Over-Voltage Clamp.
  • Absolute Maximum Voltage of 22 V.
  • Input Under-Voltage Lockout.
  • Low Inrush Current during Start-Up.
  • Integrated 36 mΩ Power FET.
  • Enable/Fault Pin.
  • Adjustable Slew Rate for Output Voltage.
  • Adjustable Current Limit.
  • Thermal Protection.
  • TSOT23-8 Package.

📥 Download Datasheet

Full PDF Text Transcription for MP5014A (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for MP5014A. For precise diagrams, and layout, please refer to the original PDF.

The Future of Analog IC Technology MP5014A 12 V, 5 A, Programmable Current-Limit Switch with Over-Volatge Clamp and Slew-Rate Control in TSOT23-8 DESCRIPTION The MP5014A ...

View more extracted text
latge Clamp and Slew-Rate Control in TSOT23-8 DESCRIPTION The MP5014A is a protection device designed to protect circuitry on the output (source) from transients on the input (VCC). Also, it protects VCC from undesired shorts and transients coming from the source. At start-up, the inrush current is limited by restricting the slew rate at the source. The slew rate is controlled by a small capacitor at DV/DT. DV/DT has an internal circuit that allows this pin to float (no connection) and still receive 1 ms ramp time at the source. The maximum load at the output is current limited. This is accomplished by utilizing a sense FE