Datasheet4U Logo Datasheet4U.com

MP5035GJ - Configurable Current Limit Switch

Download the MP5035GJ datasheet PDF. This datasheet also covers the MP5035 variant, as both devices belong to the same configurable current limit switch family and are provided as variant models within a single manufacturer datasheet.

General Description

The MP5035 is a protection device designed to protect circuitry on the output from transients on the input.

It also protects the input from shorts and transients on the output.

During start-up, the inrush current is limited by the slew rate at the output.

Key Features

  • Wide 2.9V to 22V Operating Input Voltage (VIN) Range.
  • 26V Absolute Maximum Transient VIN.
  • Integrated 82mΩ Power MOSFET.
  • Adjustable Current Limit or Fixed Current Limit when Floating the ILIMIT Pin.
  • Soft-Start Time Configurable through the DV/DT Pin.
  • Fast Response for Hard Short Protection.
  • Over-Current Protection (OCP) with Hiccup Mode.
  • Thermal Shutdown and Automatic Retry.
  • Available in a TSOT23-6 Package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MP5035-MPS.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MP503 Air-Quality Gas Sensor Winsen
MP503 PRESS-FIT MOTOLOLA DIODES Shunye
MP5005 50 Amp Single Phase Bridge Rectifier Micro Commercial Components
MP5005 PRESS-FIT MOTOLOLA DIODES Shunye
MP5005W Single Phase Bridge Rectifier MCC

Other Datasheets by Monolithic Power Systems

Part Number Description
MP5035 Configurable Current Limit Switch
MP5031 USB PD Port Controller
MP5032 QC 3.0 Controller
MP5032GJ QC 3.0 Controller
MP5034 USB Charging Port Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP5035 2.9V to 22V, 50mA to 2A, Configurable Current Limit Switch in TSOT23-6 Package DESCRIPTION The MP5035 is a protection device designed to protect circuitry on the output from transients on the input. It also protects the input from shorts and transients on the output. During start-up, the inrush current is limited by the slew rate at the output. The slew rate is controlled by the DV/DT pin. The output load maximum is current-limited. The current-limit value is controlled by an external resistor connected from the ILIMIT pin to GND. When ILIMIT is floating, the current limit is fixed at 300mA. The MP5035 is available in a TSOT23-6 package. FEATURES • Wide 2.