Datasheet4U Logo Datasheet4U.com

MP6002DN - Monolithic Flyback/Forward DC-DC Converter

This page provides the datasheet information for the MP6002DN, a member of the MP6002 Monolithic Flyback/Forward DC-DC Converter family.

Description

The MP6002 is a monolithic Flyback/Forward DC-DC converter which includes a 150V power switch and is capable of delivering up to 30W output power.

It can also be used for boost and SEPIC applications.

The MP6002 uses the fixed-frequency peak current mode primary controller architecture.

Features

  • Integrated 0.45Ω 150V Power Switch.
  • Cycle-by-Cycle Current Limiting.
  • Programmable Switching Frequency.
  • Duty Cycle Limiting with Line Feed Forward.
  • Integrated 100V Startup Circuit.
  • Internal Slope Compensation.
  • Disable Function.
  • Built-in Soft-Start.
  • Line Under Voltage Lockout.
  • Line Over Voltage Protection.
  • Auto-Restart for Opened/Shorted Output.
  • Zero Load Regulation.
  • Thermal Shutdown.

📥 Download Datasheet

Datasheet preview – MP6002DN

📁 Similar Datasheet

  • MP6005 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP60-E - PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE (Semtech Corporation)
  • MP60-F - KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE (Semtech Corporation)
  • MP601 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP602 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP604 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP606 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP608 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP60G - VOLTAGE REGULATOR MODULE FOR INTEL ADVANCED PROCESSORS (Semtech Corporation)
  • MP6 - AC-DC / Configurable (Emerson)
Other Datasheets by MPS
  • MP6002 - Monolithic Flyback/Forward DC-DC Converter
  • MP6003 - Monolithic Flyback/SEPIC DC-DC Converter
  • MP6003DN - Monolithic Flyback/SEPIC DC-DC Converter
  • MP6004 - Primary-Side Regulated Flyback/Buck 80V DCDC Converter
  • MP6004GQ - Primary-Side Regulated Flyback/Buck 80V DCDC Converter
  • MP6005 - High-Efficiency Flyback/Forward Controller
  • MP6005GK - High-Efficiency Flyback/Forward Controller
  • MP62055 - Single-Channel 500mA Current-Limited Power Distribution Switch

Full PDF Text Transcription

Click to expand full text
The Future of Analog IC Technology DESCRIPTION The MP6002 is a monolithic Flyback/Forward DC-DC converter which includes a 150V power switch and is capable of delivering up to 30W output power. It can also be used for boost and SEPIC applications. The MP6002 uses the fixed-frequency peak current mode primary controller architecture. It has an internal soft-start, auto-retry, and incorporates over current, short circuit, and over-voltage protection. The MP6002 can also skip cycles to maintain zero load regulation. It has a direct optocoupler interface which bypasses the internal error amplifier when an isolated output is desired. The MP6002 is ideal for telecom applications, and is available in a compact, thermally enhanced SO8 package with an exposed pad.
Published: |