Datasheet4U Logo Datasheet4U.com

MP86963 - monolithic Half-Bridge

Features

  • The MP86963 is a monolithic Half Bridge with built-in internal power MOSFETs and gate driver. It achieves 20A continuous output current over a wide input supply range. Integrating the Driver and MOSFETs results in high efficiency due to optimal dead time control and parasitic inductance reduction. The MP86963 is a Monolithic IC designed to drive up to 20A per phase. Housed in a very small 5x5mm TQFN Package, this device can be operated from 100kHz to 1MHz operation. The IC is intended to work w.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP8 AC-DC / Configurable Emerson
MP8005 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components
MP8005G GLASS PASSIVATED BRIDGE RECTIFIERS HY ELECTRONIC
MP801 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components
MP801G GLASS PASSIVATED BRIDGE RECTIFIERS HY ELECTRONIC

Other Datasheets by Monolithic Power Systems

Part Number Description
MP86963DUT monolithic Half-Bridge
MP86965 monolithic Half-Bridge
MP86905 monolithic half-bridge
MP86905GR monolithic half-bridge
MP86920 monolithic half-bridge driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP86963 High Efficiency, 20A, 27V Intelli-PhaseTM Solution (Integrated HS/LS FETs and Driver) in a 5x5mm QFN PATENTS PENDING – CONTROLLED DOCUMENT 00000 END OF LIFE, REFER TO MP86901 DESCRIPTION FEATURES The MP86963 is a monolithic Half Bridge with built-in internal power MOSFETs and gate driver. It achieves 20A continuous output current over a wide input supply range. Integrating the Driver and MOSFETs results in high efficiency due to optimal dead time control and parasitic inductance reduction. The MP86963 is a Monolithic IC designed to drive up to 20A per phase. Housed in a very small 5x5mm TQFN Package, this device can be operated from 100kHz to 1MHz operation. The IC is intended to work with 3.3V tri-state output controllers.
Published: |