Datasheet4U Logo Datasheet4U.com

MPQ6653-AEC1 - Single-Phase BLDC Motor Driver

General Description

The MPQ6653-AEC1 is a single-phase brushless DC (BLDC) motor driver with integrated power MOSFETs and an embedded Hall sensor.

It drives a single-phase BLDC motor, with up to 1.2A of phase peak current.

The input voltage (VIN) range is between 5.5V and 35V.

Key Features

  • configurable soft commutation and a Hall offset angle that can flexibly optimize performance. The MPQ6653-AEC1 also provides rotational speed detection. The rotational speed detector (the FG/RD pin) is an open-drain output that outputs a high or low voltage relative to the internal Hall comparator’s output. Rich protections include input over-voltage protection (OVP), under-voltage lockout (UVLO), locked-rotor protection, over-current protection (OCP), and thermal shutdown protection. The MPQ665.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MPQ6600 Quad Complementary Pair Transistors Motorola Semiconductor
MPQ6600A Quad Complementary Pair Transistors Motorola
MPQ6600A1 Quad Complementary Pair Transistors Motorola
MPQ6001 QUAD DUAL IN LINE SILICON COMPLEMENTARY PAIR TRANSISTORS Motorola
MPQ6002 QUAD DUAL IN LINE SILICON COMPLEMENTARY PAIR TRANSISTORS Motorola

Other Datasheets by Monolithic Power Systems

Part Number Description
MPQ6653GJ-AEC1 Single-Phase BLDC Motor Driver
MPQ6653GJS-AEC1 Single-Phase BLDC Motor Driver
MPQ6610 Half-Bridge Power Driver
MPQ6612A H-Bridge DC Motor Driver
MPQ6612A-D H-Bridge DC Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MPQ6653-AEC1 35V, Single-Phase BLDC Motor Driver with Embedded Hall Sensor, AEC-Q100 Qualified DESCRIPTION The MPQ6653-AEC1 is a single-phase brushless DC (BLDC) motor driver with integrated power MOSFETs and an embedded Hall sensor. It drives a single-phase BLDC motor, with up to 1.2A of phase peak current. The input voltage (VIN) range is between 5.5V and 35V. The MPQ6653-AEC1 controls the motor speed through the pulse-width modulation (PWM) signal or the DC voltage on the PWM pin. The device features configurable soft commutation and a Hall offset angle that can flexibly optimize performance. The MPQ6653-AEC1 also provides rotational speed detection.