Datasheet4U Logo Datasheet4U.com

MAX366 - Signal-Line Circuit Protectors

Description

The MAX366 and MAX367 are multiple, two-terminal circuit protectors.

Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply voltages.

Features

  • o ±40V Overvoltage Protection o Open Signal Paths with Power Off 100Ω Signal Paths with Power On o 1nA Max Path Leakage at +25°C o 44V Maximum Supply Voltage Rating o Automatic Protection; No Programming or Controls MAX366/MAX367 ______________Ordering Information PART† MAX366CPA MAX366CSA MAX366C/D MAX366EPA MAX366ESA MAX366MJA MAX367CPN MAX367CWN MAX367C/D MAX367EPN MAX367EWN MAX367MJN TEMP. RANGE 0°C to +70°C 0°C to +70°C 0°C to +70°C -40°C to +85°C -40°C to +85°C -55°C to +125°C 0°C to +70.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX3600 Laser Driver Maxim Integrated Products
MAX362 Precision / Quad / SPST Analog Switches Maxim Integrated
MAX3620 Delay Lines Maxim Integrated Products
MAX3622 Precision Clock Generator Microsemi
MAX3622 Precision Clock Generator Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX3664 622Mbps / Ultra-Low-Power / 3.3V Transimpedance Preamplifier for SDH/SONET
MAX3665 622Mbps / Ultra-Low-Power / 3.3V Transimpedance Preamplifier
MAX3667 +3.3V / 622Mbps SDH/SONET Laser Driver
MAX3668 +3.3V / 622Mbps SDH/SONET Laser Driver
MAX3669 +3.3V / 622Mbps SDH/SONET Laser Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0326; Rev 0; 12/94 Signal-Line Circuit Protectors _______________General Description The MAX366 and MAX367 are multiple, two-terminal circuit protectors. Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply voltages. These devices are used at interfaces where sensitive circuits are connected to the external world and could encounter damaging voltages (up to 35V beyond the supply rails) during power-up, power-down, or fault conditions. The MAX366 contains three independent protectors and the MAX367 contains eight. They can protect analog signals using either unipolar (4.5V to 36V) or bipolar (±2.25V to ±18V) power supplies. Each protector is symmetrical.
Published: |