Datasheet4U Logo Datasheet4U.com

DS1267B - Dual Digital Potentiometer

Description

L0, L1 - Low End of Resistor H0, H1 - High End of Resistor W0, W1 - Wiper Terminal of Resistor VB SOUT - Substrate Bias Voltage - Stacked Configuration Output RST - Serial Port Reset Input DQ - Serial Port Data Input CLK - Serial Port Clock Input COUT VCC GND - Cascade Port Output - +5V S

Features

  • Two digitally controlled, 256-position potentiometers Serial port provides means for setting and reading both potentiometers Resistors can be connected in series to provide increased total resistance 16-pin SO and 20-pin TSSOP packages Resistive elements are temperature compensated to ±0.3 LSB relative linearity Standard resistance values:.
  • DS1267B-10 ~ 10kΩ.
  • DS1267B-50 ~ 50kΩ.
  • DS1267B-100 ~ 100kΩ Operating Temperature Range:.
  • Industrial: -40°C to +85°C PIN A.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1267 Dual Digital Potentiometer Chip Dallas Semiconducotr
DS1260 Smart Battery Dallas Semiconducotr
DS1265AB 8M Nonvolatile SRAM Maxim Integrated Products
DS1265W 3.3V 8Mb Nonvolatile SRAM Dallas Semiconducotr
DS1265Y 8M Nonvolatile SRAM Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS1210 Nonvolatile Controller
DS1217M Nonvolatile Read/Write Cartridge
DS1218 Nonvolatile Controller
DS1220AB 16k Nonvolatile SRAM
DS1220AD 16k Nonvolatile SRAM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS1267B Dual Digital Potentiometer FEATURES Two digitally controlled, 256-position potentiometers Serial port provides means for setting and reading both potentiometers Resistors can be connected in series to provide increased total resistance 16-pin SO and 20-pin TSSOP packages Resistive elements are temperature compensated to ±0.3 LSB relative linearity Standard resistance values: – DS1267B-10 ~ 10kΩ – DS1267B-50 ~ 50kΩ – DS1267B-100 ~ 100kΩ Operating Temperature Range: – Industrial: -40°C to +85°C PIN ASSIGNMENT VB NC H1 L1 W1 RST CLK GND 1 2 3 4 5 6 7 8 16 VCC 15 NC 14 SOUT 13 W0 12 H0 11 L0 10 COUT 9 DQ 16-Pin SO (300-mil) See Mech.
Published: |