Datasheet4U Logo Datasheet4U.com

DS1267 - Dual Digital Potentiometer Chip

General Description

L0, L1 H0, H1 W0, W1 VB SOUT RST DQ CLK COUT VCC GND NC - Low End of Resistor High End of Resistor Wiper Terminal of Resistor Substrate Bias Voltage Stacked Configuration Output Serial Port Reset Input Serial Port Data Input Serial Port Clock Input Cascade Port Output +5 Volt Supply Ground No In

Key Features

  • Ultra-low power consumption, quiet, pumpless design.
  • Two digitally controlled, 256-position potentiometers.
  • Serial port provides means for setting and reading both potentiometers.
  • Resistors can be connected in series to provide increased total resistance.
  • 14-pin DIP, 16-pin SOIC, 20-pin TSSOP packages.
  • Resistive elements are temperature compensated to ±0.3 LSB relative linearity.
  • Standard resistance values:.
  • DS1267-10 ~ 10 kΩ.
  • DS1267-50 ~ 50.

📥 Download Datasheet

Datasheet Details

Part number DS1267
Manufacturer Dallas Semiconducotr
File Size 312.47 KB
Description Dual Digital Potentiometer Chip
Datasheet download datasheet DS1267 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS1267 Dual Digital Potentiometer Chip www.dalsemi.com FEATURES § Ultra-low power consumption, quiet, pumpless design § Two digitally controlled, 256-position potentiometers § Serial port provides means for setting and reading both potentiometers § Resistors can be connected in series to provide increased total resistance § 14-pin DIP, 16-pin SOIC, 20-pin TSSOP packages § Resistive elements are temperature compensated to ±0.3 LSB relative linearity § Standard resistance values: – DS1267-10 ~ 10 kΩ – DS1267-50 ~ 50 kΩ – DS1267-100 ~ 100 kΩ § Operating Temperature Range: – Industrial: -40°C to +85°C PIN ASSIGNMENT VB NC H1 L1 W1 RST CLK GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC NC SOUT W0 H0 L0 COUT DQ 16-Pin SOIC (300-mil) See Mech.