MAX11081 - High-Voltage Battery-Pack Fault Monitor

Product Overview

Maxim Integrated

Part number	MAX11081
Manufacturer	Maxim Integrated
File Size	288.54 KB
Description	High-Voltage Battery-Pack Fault Monitor
Datasheet	MAX11081 Datasheet
Note	This datasheet PDF includes multiple part numbers: MAX11081, MAX11080. Please refer to the document for exact specifications by model.
Additional preview pages of the MAX11081 datasheet.

The MAX11080/MAX11081 are battery-pack fault-monitor ICs capable of monitoring up to 12 lithium-ion (Li+) battery cells.

o Up to 12-Cell Li+ Battery Voltage Fault Detection o Operation from 6.0V to 72V o Pin-Selectable Overvoltage Threshold from +3.3V to +4.8V in 100mV Increments ±25mV Overvoltage-Detection Accuracy o Pin-Selectable Undervoltage Threshold from +1.6V to +2.8V in 200mV Increments ±100mV Undervoltage-Detection Accuracy o Overvoltage/Undervoltage-Threshold Detection Hysteresis MAX11080: 300mV MAX11081: 37.5mV o Programmable Delay Time of Alarm Detection from 3.0ms to 3.32s with an External Capacitor o.

📁 Similar Datasheet

MAX1108 - Single-Supply / Low-Power / 2-Channel / Serial 8-Bit ADCs (Maxim)
MAX11080 - High-Voltage Battery-Pack Fault Monitor (Maxim Integrated Products)
MAX110 - Low-Cost / 2-Channel / 14-Bit Serial ADCs (Maxim)
MAX1101 - Single-Chip / 8-Bit CCD Digitizer (Maxim)
MAX11014 - Automatic RF MESFET Amplifier Drain-Current Controllers (Maxim Integrated Products)
MAX11015 - Automatic RF MESFET Amplifier Drain-Current Controllers (Maxim Integrated Products)
MAX1102 - 8-Bit CODECs (Maxim)
MAX11040 - Sigma-Delta ADC (Maxim Integrated Products)

Other Datasheets by Maxim Integrated

Published: Oct 21, 2018 |