Datasheet4U Logo Datasheet4U.com

MAX11080 - High-Voltage Battery-Pack Fault Monitor

General Description

The MAX11080 is a battery-pack fault-monitor IC capable of monitoring up to 12 lithium-ion (Li+) battery cells.

This device is designed to provide an overvoltage or undervoltage fault indication when any of the cells cross the user-selectable threshold for longer than the set program-delay interval.

Key Features

  • o Up to 12-Cell Li+ Battery Voltage Fault Detection MAX11080 Ordering Information PART MAX11080GUU+ TEMP RANGE -40°C to +105°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1108 Single-Supply / Low-Power / 2-Channel / Serial 8-Bit ADCs Maxim
MAX11081 High-Voltage Battery-Pack Fault Monitor Maxim Integrated
MAX110 Low-Cost / 2-Channel / 14-Bit Serial ADCs Maxim
MAX1101 Single-Chip / 8-Bit CCD Digitizer Maxim
MAX1102 8-Bit CODECs Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX11014 Automatic RF MESFET Amplifier Drain-Current Controllers
MAX11015 Automatic RF MESFET Amplifier Drain-Current Controllers
MAX11040 Sigma-Delta ADC
MAX11040K (MAX11040K / MAX11060) Sigma-Delta ADCs
MAX11041 (MAX11041 / MAX11042) Wired Remote Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4584; Rev 0; 5/09 www.DataSheet4U.com 12-Channel, High-Voltage Battery-Pack Fault Monitor General Description The MAX11080 is a battery-pack fault-monitor IC capable of monitoring up to 12 lithium-ion (Li+) battery cells. This device is designed to provide an overvoltage or undervoltage fault indication when any of the cells cross the user-selectable threshold for longer than the set program-delay interval. The overvoltage levels are pin selectable from +3.3V to +4.8V in 100mV increments, and have a guaranteed accuracy of ±25mV over the entire temperature range. The undervoltage level is also user selectable from +1.6V to +2.8V in 200mV increments. These levels are guaranteed to ±100mV over the entire temperature range.