Datasheet4U Logo Datasheet4U.com

MAX17230 - Synchronous Dual Buck Controller

Description

The MAX17230/MAX17231 offers dual synchronous stepdown DC-DC controllers with integrated MOSFETs and a step-up/boost controller.

They operate over a 3.5V to 36V input voltage range, and down to 2V with the boost controller active.

Features

  • Eliminates External Components and Reduces Total Cost.
  • No Schottky-Synchronous Operation for High Efficiency and Reduced Cost.
  • Simple External RC compensation for Stable Operation at Any Output Voltage.
  • All-Ceramic Capacitor Solution: Ultra-Compact Layout.
  • 180° Out-of-Phase Operation Reduces Output Ripple and Enables Cascaded Power Supplies.
  • Reduces Number of DC-DC Controllers to Stock.
  • Fixed Output Voltage with ±1% Accuracy (5V/3.3V) or Ex.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1723 Step-Up DC-DC Converters Maxim
MAX172 Complete 10s CMOS 12-Bit ADC Maxim
MAX1720 Switched Capacitor Voltage Inverter ON Semiconductor
MAX1722 Step-Up DC-DC Converters Maxim
MAX17220 nanoPower Synchronous Boost Converters Analog Devices

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX17231 Synchronous Dual Buck Controller
MAX17232 Synchronous Dual Buck Controller
MAX17233 Synchronous Dual Buck Controller
MAX1720 Switched-Capacitor Voltage Inverters
MAX17201 Stand-Alone ModelGauge m5 Fuel Gauge

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX17230/MAX17231 2V–36V, Synchronous Dual Buck Controller with Integrated Boost and 20µA Quiescent Current General Description The MAX17230/MAX17231 offers dual synchronous stepdown DC-DC controllers with integrated MOSFETs and a step-up/boost controller. They operate over a 3.5V to 36V input voltage range, and down to 2V with the boost controller active. The devices can operate in dropout condition by running at 95% duty cycle. The controllers can generate fixed output voltages of 3.3V/5V, along with the capability to program the output voltage between 1V to 10V. These devices use current-mode-control architecture and can be operated in the pulse-width modulation (PWM) or pulse-frequency modulation (PFM) control schemes.
Published: |