Datasheet4U Logo Datasheet4U.com

MAX20091 - 35-Channel Contact Monitor

Description

The MAX20091 is a 35-channel automotive contact monitor for automotive applications.

Ten contact monitor inputs can be used with either ground- or battery-connected switches; the other 25 inputs are for use with groundconnected switches.

Features

  • an SPI interface to monitor the switch status and set the device configuration. An interrupt output allows the device to wake a local microcontroller when a switch status change is detected. In addition, a switch status change turns on the internal regulator. The MAX20091 is available in a compact 48-pin TQFN package and operates over the -40°C to +125°C temperature range.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX2009 1200MHz to 2500MHz Adjustable RF Predistorter Maxim
MAX200 RS-232 Transceivers Maxim
MAX20011E Automotive Single 8A Step-Down Converters Analog Devices
MAX20011F Automotive Single 12A Step-Down Converters Analog Devices
MAX20011G Automotive Single 16A Step-Down Converters Analog Devices

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX20090 High-Brightness LED Controller
MAX20090B High-Brightness LED Controller
MAX20002 2A/3A Fully Integrated Step-Down Converters
MAX20003 2A/3A Fully Integrated Step-Down Converters
MAX20021 Step-Down DC-DC Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX20091 EVALUATION KIT AVAILABLE 35-Channel Contact Monitor General Description The MAX20091 is a 35-channel automotive contact monitor for automotive applications. Ten contact monitor inputs can be used with either ground- or battery-connected switches; the other 25 inputs are for use with groundconnected switches. The IC operates over a 5.5V to 28V voltage range and withstands voltages up to 42V. It protects lowvoltage circuitry from high voltages and reverse-battery conditions. The IC’s low-current operation under all operating conditions makes it suitable for use in electronic control units (ECUs) that are connected directly to the automotive battery. The IC has an adjustable scan mode that reduces the current drawn in key-off while maintaining polling capability.
Published: |