Datasheet4U Logo Datasheet4U.com

MAX2550 - WCDMA Femtocell Transceiver

Description

The MAX2550 is a complete single-chip RF-to-bits and bits-to-RF radio transceiver.

This device is in compliance with the 3GPP TS25.104 femtocell standard for Band I, V, and VIII.

Features

  • unparalleled receive blocker performance and the industry’s lowest noise figure for higher data rates and range. Low-power operational modes are available to minimize power consumption. The transmitter is designed to deliver EVM far exceeding the standard requirement at 0dBm. The MAX2550.
  • MAX2553 is a family of pin-compatible transceivers that cover all major WCDMA and cdma2000® bands. All parts are controlled by a 4-wire interface. The MAX2550 is packaged in a compact 7mm x 7mm TQFN and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX25560 6 x 220mA LED Backlight Driver Analog Devices
MAX250 +5V Powered Isolated RS-232 Drivers/Receivers Maxim
MAX251 +5V Powered Isolated RS-232 Drivers/Receivers Maxim
MAX2510 Low-Voltage IF Transceiver Maxim
MAX2511 Low-Voltage IF Transceiver Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX25250 Four Output Mini PMIC
MAX2530 Quadruple-Mode PCS/Cellular/GPS LNA/Mixers
MAX2537 Quadruple-Mode PCS/Cellular/GPS LNA/Mixers
MAX25600 Synchronous High-Voltage Four-Switch Buck- Boost LED Controller
MAX25610A Synchronous Buck and Buck-Boost LED Driver/DC-DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE MAX2550 Band I, V, and VIII WCDMA Femtocell Transceiver with GSM Monitoring General Description The MAX2550 is a complete single-chip RF-to-bits and bits-to-RF radio transceiver. This device is in compliance with the 3GPP TS25.104 femtocell standard for Band I, V, and VIII. It is equipped with multiple receive inputs and transmit outputs for low band, high band, and macro-cell monitoring (Table 1). This fully integrated transceiver facilitates compact radio designs for dongle and standalone femtocell products by minimizing external component count. Maxim’s MAX-PHY serial interface is used to drastically reduce IC pin count, while worldwide field-proven architecture accelerates time to product deployment.
Published: |