Datasheet4U Logo Datasheet4U.com

MAX5912 - -48V Simple Swapper Hot-Swap Switches

This page provides the datasheet information for the MAX5912, a member of the MAX5911 -48V Simple Swapper Hot-Swap Switches family.

Description

The MAX5911/MAX5912 are fully integrated hot-swap switches for negative supply rails.

These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing problematic glitches on the negative power-supply rail.

Features

  • that prevent damage to.

📥 Download Datasheet

Datasheet preview – MAX5912

Datasheet Details

Part number MAX5912
Manufacturer Maxim Integrated
File Size 417.48 KB
Description -48V Simple Swapper Hot-Swap Switches
Datasheet download datasheet MAX5912 Datasheet
Additional preview pages of the MAX5912 datasheet.

📁 Similar Datasheet

  • MAX5910 - +65V Simple Swapper Hot-Swap Switches (Maxim)
  • MAX5911 - -48V Simple Swapper Hot-Swap Switches (Maxim)
  • MAX5913 - +48V Quad Hot-Swap Controllers (Maxim)
  • MAX5913A - +48V Quad Hot-Swap Controllers (Maxim Integrated Products)
  • MAX5914A - +48V Quad Hot-Swap Controllers (Maxim Integrated Products)
  • MAX5915 - Dual PCI 2.2 Hot-Swap Controllers (Maxim)
  • MAX5918 - Low-Voltage / Dual Hot-Swap Controllers (Maxim)
  • MAX5919 - Low-Voltage / Dual Hot-Swap Controllers (Maxim)
  • MAX5900 - -100V SOT23 Simple Swapper Hot-Swap Controllers (Maxim)
  • MAX5902 - +72V SOT23 Simple Swapper Hot-Swap Controllers (Maxim)
Other Datasheets by Maxim Integrated
  • MAX5914 - +48V Quad Hot-Swap Controllers
  • MAX5915A - Dual PCI 2.2 Hot-Swap Controllers
  • MAX5916 - Dual PCI 2.2 Hot-Swap Controllers
  • MAX5916A - Dual PCI 2.2 Hot-Swap Controllers
  • MAX5917 - +65V Simple Swapper Hot-Swap Switches
  • MAX5901 - -100V SOT23 Simple Swapper Hot-Swap Controllers
  • MAX5905 - Low-Voltage / Dual Hot-Swap Controllers/Power Sequencers
  • MAX5906 - Low-Voltage / Dual Hot-Swap Controllers/Power Sequencers

Full PDF Text Transcription

Click to expand full text
19-1832; Rev 0a; 1/01 -48V Simple Swapper Hot-Swap Switches MAX5911/MAX5912 General Description The MAX5911/MAX5912 are fully integrated hot-swap switches for negative supply rails. These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing problematic glitches on the negative power-supply rail. They also monitor various circuit parameters and disconnect the load if a fault condition occurs, alerting the host with a logic-level FAULT output. The MAX5911/MAX5912 operate over a voltage range of -16V to -65V and are designed to permit hot plugging of an IP phone into a hub, but are not limited to that operation.
Published: |