Datasheet4U Logo Datasheet4U.com

DS2714 - Quad Loose Cell NiMH Charger

Description

The DS2714 is ideal for standalone charging of 1 to 4 AA or AAA NiMH “loose” cells.

NiCd cells can also be charged.

Temperature, voltage and charge time are monitored to provide proper fast charging control algorithms for Nickel Metal Hydride (NiMH) batteries.

Features

  • Charges 1 to 4 NiMH Cells Detects and Avoids Charging Alkaline Cells Pre-Charges Deeply Depleted Cells Fast Charges NiMH with -DV Termination Sensitivity of 2mV (typ) Monitors Voltage, Temperature and Time for Safety and Secondary Termination Works with Regulated Charge Current Source Drives PNP Type Pass Element Compatible with Integrated Primary-Side PWM Controllers 20-pin TSSOP Package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS2710 Single-Cell NiMH Charger Maxim
DS2715 NiMH Battery Pack Charge Controller Dallas Semiconducotr
DS2703 SHA-1 Battery Pack Authentication IC Dallas Semiconductor
DS2720 Efficient/ Addressable Single-Cell Rechargeable Lithium Protection IC Dallas Semiconducotr
DS2726 5-Cell to 10-Cell Li+ Protector Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS2711 (DS2711 / DS2712) Loose Cell NiMH Chargers
DS2712 (DS2711 / DS2712) Loose Cell NiMH Chargers
DS2704 1280-Bit EEPROM
DS2705 SHA-1 Authentication Master
DS2741 Current Monitor and Accumulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DS2714 Quad Loose Cell NiMH Charger www.maxim-ic.com GENERAL DESCRIPTION The DS2714 is ideal for standalone charging of 1 to 4 AA or AAA NiMH “loose” cells. NiCd cells can also be charged. Temperature, voltage and charge time are monitored to provide proper fast charging control algorithms for Nickel Metal Hydride (NiMH) batteries. Battery tests are included to detect defective or inappropriate cells such as Alkaline primary batteries. The DS2714 supports a parallel charging topology, with independent monitoring and control of each cell.
Published: |