Datasheet4U Logo Datasheet4U.com

MAX11080 - High-Voltage Battery-Pack Fault Monitor

Description

The MAX11080 is a battery-pack fault-monitor IC capable of monitoring up to 12 lithium-ion (Li+) battery cells.

This device is designed to provide an overvoltage or undervoltage fault indication when any of the cells cross the user-selectable threshold for longer than the set program-delay interval.

Features

  • o Up to 12-Cell Li+ Battery Voltage Fault Detection MAX11080 Ordering Information PART MAX11080GUU+ TEMP RANGE -40°C to +105°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1108 Single-Supply / Low-Power / 2-Channel / Serial 8-Bit ADCs Maxim
MAX11081 High-Voltage Battery-Pack Fault Monitor Maxim Integrated
MAX110 Low-Cost / 2-Channel / 14-Bit Serial ADCs Maxim
MAX1101 Single-Chip / 8-Bit CCD Digitizer Maxim
MAX1102 8-Bit CODECs Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX11014 Automatic RF MESFET Amplifier Drain-Current Controllers
MAX11015 Automatic RF MESFET Amplifier Drain-Current Controllers
MAX11040 Sigma-Delta ADC
MAX11040K (MAX11040K / MAX11060) Sigma-Delta ADCs
MAX11041 (MAX11041 / MAX11042) Wired Remote Controllers

Full PDF Text Transcription

Click to expand full text
19-4584; Rev 0; 5/09 www.DataSheet4U.com 12-Channel, High-Voltage Battery-Pack Fault Monitor General Description The MAX11080 is a battery-pack fault-monitor IC capable of monitoring up to 12 lithium-ion (Li+) battery cells. This device is designed to provide an overvoltage or undervoltage fault indication when any of the cells cross the user-selectable threshold for longer than the set program-delay interval. The overvoltage levels are pin selectable from +3.3V to +4.8V in 100mV increments, and have a guaranteed accuracy of ±25mV over the entire temperature range. The undervoltage level is also user selectable from +1.6V to +2.8V in 200mV increments. These levels are guaranteed to ±100mV over the entire temperature range.
Published: |