Datasheet4U Logo Datasheet4U.com

MAX13481E - (MAX13481E - MAX13483E) ESD-Protected USB Transceivers

Description

The MAX13481E/MAX13482E/MAX13483E ±15kV ESDprotected USB-compliant transceivers interface lowvoltage ASICs with USB devices.

The transceivers fully comply to USB 2.0 when operating at full-speed (12Mbps).

Features

  • Active-Low Enumeration Input Controls D+ Pullup Resistor (MAX13482E).
  • Active-Low Enumeration Input Controls Internal Pullup Switch (MAX13481E).
  • ±15kV ESD Protection on D+ and D.
  • USB 2.0 Full-Speed Compliant Transceiver.
  • VBUS Detection (MAX13482E/MAX13483E).
  • +1.60V to +3.6V VL Allows Connection with LowVoltage ASICs.
  • No Power-Supply Sequencing Required.
  • Pin Compatible with MIC2551A (MAX13481E).
  • Pin Compatible with DP.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX13487E Half-Duplex RS-485-Compatible Transceiver Analog Devices
MAX13488E Half-Duplex RS-485-Compatible Transceiver Analog Devices
MAX134 3 Digit DMM Circuit Maxim
MAX1343 Multichannel ADCs/DACs Maxim Integrated
MAX130 3 Digit A/D Converters with Bandgap Refrence Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX13482E (MAX13481E - MAX13483E) ESD-Protected USB Transceivers
MAX13483E (MAX13481E - MAX13483E) ESD-Protected USB Transceivers
MAX13485E (MAX13485E / MAX13486E) Half Duplex Transceiveer
MAX13486E (MAX13485E / MAX13486E) Half Duplex Transceiveer
MAX13487E Half-Duplex RS-485-/RS-422- Compatible Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-3801; Rev 2; 1/06 ±15kV ESD-Protected USB Transceivers with External/Internal Pullup Resistors General Description The MAX13481E/MAX13482E/MAX13483E ±15kV ESDprotected USB-compliant transceivers interface lowvoltage ASICs with USB devices. The transceivers fully comply to USB 2.0 when operating at full-speed (12Mbps). The transceivers also operate with VL as low as 1.6V, ensuring compatibility with low-voltage ASICs. The MAX13481E/MAX13482E/MAX13483E feature a logic-selectable suspend mode that reduces current consumption. Integrated ±15kV ESD circuitry protects D+ and D- bus connections. The MAX13481E/MAX13482E/MAX13483E operate over the extended -40°C to +85°C temperature range and are available in a 16-pin (3mm x 3mm) thin QFN package.
Published: |