Datasheet4U Logo Datasheet4U.com

MAX14569 - Dual-Pair LLT

Description

The MAX14569 is a dedicated dual-pair unidirectional logic-level translator that is ideal for industrial and metering applications.

Voltages VCC and VL set the logic levels on either side of the device.

Features

  • a high-efficiency charge pump to boost the battery input, VBAT, to VCC (5V). The device features an extreme power-saving mode that reduces supply current to a typical 0.01FA. The device also features thermal short-circuit protection for enhanced protection in.

📥 Download Datasheet

Datasheet preview – MAX14569

📁 Similar Datasheet

  • MAX145 - Serial 12-Bit ADCs (Maxim)
  • MAX1450 - 1%-Accurate Signal Conditioner (Maxim)
  • MAX14502 - Hi-Speed USB-to-SD Card Readers (Maxim Integrated)
  • MAX14504 - Dual SPDT Negative Rail Analog Switches (Maxim Integrated)
  • MAX14505 - Dual SPDT Negative Rail Analog Switches (Maxim Integrated)
  • MAX14505A - Dual SPDT Negative Rail Analog Switches (Maxim Integrated)
  • MAX14506 - Dual SPDT Negative Rail Analog Switches (Maxim Integrated)
  • MAX1452 - Low-Cost Precision Sensor Signal Conditioner (Maxim)
  • MAX1454 - Precision Sensor Signal Conditioner (Maxim)
  • MAX1457 - 0.1%-Accurate Signal Conditioner for Piezoresistive Sensor Compensation (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX14562 - 36V-Capable Overvoltage Protector
  • MAX14566AE - USB Host Charger Identification Analog Switches
  • MAX14566BE - USB Host Charger Identification Analog Switches
  • MAX14566E - USB Host Charger Identification Analog Switches
  • MAX14500 - Hi-Speed USB-to-SD Card Readers
  • MAX14501 - Hi-Speed USB-to-SD Card Readers
  • MAX14503 - Hi-Speed USB-to-SD Card Readers
  • MAX14514 - Dual Electroluminescent Lamp Driver

Full PDF Text Transcription

Click to expand full text
www.DataSheet.co.kr 19-5523; Rev 0; 9/10 Dual-Pair LLT with Charge Pump and High-ESD Protection General Description The MAX14569 is a dedicated dual-pair unidirectional logic-level translator that is ideal for industrial and metering applications. Voltages VCC and VL set the logic levels on either side of the device. Logic-high signals present on the VL side of the device appear as highvoltage logic signals on the VCC side of the device and vice versa. The device has two pairs of logic-level translators in back-to-back configuration: one logic-level translator from a low voltage to a high voltage and the other logiclevel translator from a high voltage to a low voltage. The device also features a high-efficiency charge pump to boost the battery input, VBAT, to VCC (5V).
Published: |