Datasheet4U Logo Datasheet4U.com

MAX19993 - 1200MHz To 1700MHz Downconversion Mixer

Description

The MAX19993 dual-channel downconverter is designed to provide 6.4dB of conversion gain, +27dBm input IP3, 15.4dBm 1dB input compression point, and a noise figure of 9.8dB for 1200MHz to 1700MHz diversity receiver applications.

Features

  • S 1200MHz to 1700MHz RF Frequency Range S 1000MHz to 1560MHz LO Frequency Range S 50MHz to 500MHz IF Frequency Range S 6.4dB Typical Conversion Gain S 9.8dB Typical Noise Figure S +27dBm Typical Input IP3 S 15.4dBm Typical Input 1dB Compression Point S 72dBc Typical 2RF - 2LO Spurious Rejection at MAX19993 PRF = -10dBm S Dual Channels Ideal for Diversity Receiver.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1999 High-Efficiency / Quad Output / Main Power- Supply Controllers for Notebook Computers Maxim
MAX199 Multi-Range (4V / 2V / +4V / +2V) / +5V Supply / 12-Bit DAS with 8+4 Bus Interface Maxim
MAX1992 Quick-PWM Step-Down Controllers Maxim Integrated
MAX1993 Quick-PWM Step-Down Controllers Maxim Integrated
MAX1994 Dual Step-Down Controllers Plus Linear Regulator Controller Maxim Integrated

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX19994A 1200MHz to 2000MHz Downconversion Mixer with LO Buffer/Switch
MAX19995 1700MHz to 2200MHz Downconversion Mixer
MAX19995A 1700MHz To 2200MHz Downconversion Mixer
MAX19996A 2000MHz To 3900MHz Downconversion Mixer
MAX19997A 1800MHz to 2900MHz Downconversion Mixer

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 19-5307; Rev 0; 6/10 Dual, SiGe, High-Linearity, 1200MHz to 1700MHz Downconversion Mixer with LO Buffer/Switch General Description The MAX19993 dual-channel downconverter is designed to provide 6.4dB of conversion gain, +27dBm input IP3, 15.4dBm 1dB input compression point, and a noise figure of 9.8dB for 1200MHz to 1700MHz diversity receiver applications. With an optimized LO frequency range of 1000MHz to 1560MHz, this mixer is ideal for low-side LO injection architectures. High-side LO injection is supported by the MAX19993A, which is pinpin and functionally compatible with the MAX19993. In addition to offering excellent linearity and noise performance, the MAX19993 also yields a high level of component integration.
Published: |