MAX4880 Overview
The MAX4880 is an overvoltage-protection controller with an internal current-limited switch that can be configured as a low-cost battery charger. When the input voltage exceeds the overvoltage trip level (5.7V), or drops below the undervoltage-lockout level (4.2V), the MAX4880 turns off the external n-channel MOSFET and asserts an undervoltage/overvoltage flag indicator (FLAGV) low to notify the processor. The...
MAX4880 Key Features
- Overvoltage Protection Up to 28V
- Preset 5.6V Overvoltage Trip Level
- Internal 525mA Current-Limited Switch
- ±1.2% Accurate Battery Disconnect (4.2V)
- Drives Low-Cost n-Channel MOSFET
- Internal 50ms Startup Delay
- Overvoltage/Undervoltage-Fault FLAGV Indicator
- Battery-Voltage-Trip BAT_OK Indicator
- Undervoltage Lockout
- Thermal Shutdown Protection