ANTC205 - Jitter Blocker

Features

The output frequency does not need to be the same as the input frequency; frequency translation is possible.
The PL902 can have up to three outputs, so there is fanout capability. The PL903 has one differential output and the PL904 can have up to three differential outputs.
There is a configuration select pin on the PL902 that allows for switching between two different configurations. The parameters that are switched can be any.

Micrel

Datasheet Details

Part number	ANTC205
Manufacturer	Micrel
File Size	754.08 KB
Description	Jitter Blocker
Datasheet	ANTC205 Datasheet
Additional preview pages of the ANTC205 datasheet.

📁 Similar Datasheet

ANT-2.45-CHP-X - 2.45GHz ULTRA COMPACT CHIP ANTENNA (Linx)
ANT-GSMQB - GSM Antenna Quad Band (rfsolutions)
ANT-J20 - GPS Antenna (Mitsumi Electronics)
ANT-JX2 - GPS Antenna (Mitsumi Electronics)
ANT016008LCD1575MA1 - Multilayer Antenna (TDK)
ANT016008LCS2442MA2 - Multilayer Antenna (TDK)
ANT1000 - ANTAIOS - multi-fieldbus communication chip (profichip)
ANT1001 - ANTAIOS - multi-fieldbus communication chip (profichip)
ANT2801 - 5V USB input two-cell lithium battery efficient charger (ChipSourceTek)
ANT3118 - Class D audio power amplifier (ANATEK)

Other Datasheets by Micrel

Full PDF Text Transcription

Click to expand full text

ANTC205 Introduction The JitterBlocker takes very noisy and jittery clocks and cleans out all the deterministic and excessive jitter. It can handle thousands of picoseconds of period jitter at its input and reduces that to below 100ps on the output. Eye-Opening Performance When Eyes Close Block Jitter Accumulation When Jitter Accumulates Block Deterministic Jitter JitterBlocker Output JitterBlocker Output When Deterministic Jitter Dominates JitterBlocker Output Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com September 16, 2014 Revision 1.0 Micrel, Inc.

Published: May 14, 2018 |