KSZ8091MLX Description
The KSZ8091MLX is a single-supply 10Base-T/100BaseTX Ethernet physical layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8091MLX is a highly-integrated, pact solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs, by integrating a low-noise regulator to supply the 1.2V core,...
KSZ8091MLX Key Features
- Single-chip 10Base-T/100Base-TX IEEE 802.3 pliant Ethernet transceiver
- MII interface support
- Back-to-back mode support for a 100Mbps copper repeater
- MDC/MDIO management interface for PHY register configuration
- Programmable interrupt output
- LED outputs for link, activity and speed status indication
- On-chip termination resistors for the differential pairs
- Baseline wander correction
- HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enabl
- Auto-Negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)