MIC2026 Datasheet | Micrel Semiconductor

Description Features The MIC2026 and MIC2076 are high-side MOSFET switches optimized for general-purpose power distribution requiring circuit protection. The MIC2026/76 are internally current limited and have thermal shutdown that protects the device and load. The MIC2076 offers “smart” thermal shutdown that reduces current consumption in fault modes. When a thermal shutdown fault occurs, the output is latched off until the faulty load is removed. Removing the load or - 140mΩ maximum on-resistance per channel - 2.7V to 5.5V operating range - 500m A minimum continuous current per channel - Shortcircuit protection with thermal shutdown - Thermally isolated channels - Fault status flag with 3ms filter eliminates false assertions - Undervoltage lockout toggling the enable input will reset the device output. - Reverse current flow blocking (no “body diode”) Both devices employ soft-start circuitry that minimizes inrush current in applications where highly capacitive loads are employed. A fault status output flag is asserted during overcurrent and thermal shutdown conditions. Transient faults are internally filtered. - Circuit breaker mode (MIC2076) - Logic-patible inputs - Soft-start circuit - Low quiescent current - Pin patible with MIC2526 The MIC2026/76 are available in 8-pin DIP or 8-pin SOIC. - UL File # E179633 All support documentation can be found on Micrel’s web site at .micrel.. Applications - USB peripherals - General purpose power switching - ACPI power distribution - Notebook PCs - PDAs - PC card hot swap Typical Application VCONT. 10k 10k Logic Controller VIN ON/OFF OVERCURRENT OVERCURRENT ON/OFF VCC 2.7V to 5.5V MIC2026-2 ENA FLGAI FLGB ENB OUTA...