Download SY88289CL Datasheet PDF
SY88289CL datasheet preview
SY88289CL page 2
Page 2
SY88289CL page 3
Page 3

SY88289CL Key Features

  • Single 3.3V power supply post amplifier is designed for use in fiber-optic receivers
  • 125Mbps to 3.2Gbps operation The device connects to typical transimpedance
  • Low-noise CML data outputs amplifiers (TIAs). The linear signal output from TIAs can
  • Chatter-free open-collector TTL Loss-of-Signal (LOS) amplitude over time. The SY88289CL quantizes these output with an i
  • TTL /EN input The SY88289CL operates from a single +3.3V power supply, over temperatures ranging from -40oC to +85oC
  • Programmable LOS level set (LOSLVL) With its wide bandwidth and high gain, signals with data
  • Ideal for multi-rate

Related Micrel Semiconductor Datasheets

Part Number Description
SY88289AL CML Low-Power Limiting Post Amplifier
SY88289BL CML Limiting Post Amplifier
SY88212L 2.5Gbps Laser Diode Driver
SY88216L 2.5Gbps Burst Mode Laser Driver
SY88232AL 2.5Gbps Laser Diode Driver

SY88289CL Description

Features The SY88289CL low-power, high-sensitivity, limiting Single 3.3V power supply post amplifier is designed for use in fiber-optic receivers. 125Mbps to 3.2Gbps operation The device connects to typical transimpedance Low-noise CML data outputs amplifiers (TIAs). The linear signal output from TIAs can High-gain LOS contain significant amounts of noise and may vary in Chatter-free open-collector TTL...

SY88289CL Applications

  • Available in a tiny (3mm x 3mm) 16-pin MLF® amplified to drive devices with CML inputs or ACpackage coupled CML/PECL inputs. The SY88289CL generates a high-gain
  • APON, BPON, EPON, GEPON and GPON high-gain input stage for increased LOS sensitivity. A