DSA1213 Datasheet | Microchip Technology

Features - Automotive AEC-Q100 Qualified - Any Frequency between 2.5 MHz and 450 MHz - Supports LVPECL, LVDS, or HCSL Differential Outputs - Very Low RMS Phase Jitter: <650 fs (typ.) - plies with PCIe Gen1/2/3/4/5/6 mon Clock Spec - High Stability: ±20 ppm, ±25 ppm, ±50 ppm - Wide Temperature Range: - Automotive Grade 1: - 40°C to +125°C (DSA12x3 LVDS Output Only) - Automotive Grade 2: - 40°C to +105°C - Automotive Grade 3: - 40°C to +85°C - Small Industry-Standard Footprints - 2.5 mm x 2.0 mm - 3.2 mm x 2.5 mm - 5.0 mm x 3.2 mm - 7.0 mm x 5.0 mm - Excellent Shock and Vibration Immunity - Qualified to MIL-STD-883 - High Reliability - 20x Better MTF than Quartz Oscillators - Supply Range of 2.25V to 3.63V - Standby, Frequency Select, and Output Enable Functions - Lead-Free and Ro HS-pliant Applications - Automotive Infotainment - Automotive ADAS - In-Vehicle Networking, CAN Bus, Ethernet General Description The DSA12x2/3/4 family of high performance oscillators utilizes the latest generation of silicon MEMS technology that reduces close-in noise and provides excellent jitter and stability over a wide range of supply voltages and temperatures. By eliminating the need for quartz or SAW technology, MEMS oscillators significantly enhance reliability and accelerate product development, while meeting stringent clock performance criteria for automotive applications. The DSA12x2/3/4 family features a control function on pin 1 or pin 2 that permits either a standby feature (plete power down when STDBY is low), output enable (output is tri-stated with OE low), or a frequency select (choice of two frequencies selected by FS high/low). See the Product Identification System section for detailed information. All oscillators are available in industry-standard packages, including the small 2.5 mm x 2.0 mm, and are “drop-in” replacements for standard 6-pin LVPECL/LVDS/HCSL crystal oscillators. Package Types DSA12X2/3/4 6-Lead CDFN/VDFN OE/STDBY/FS 1 NC...