Datasheet4U Logo Datasheet4U.com

MIC33M356 Datasheet Power Module Buck Converter

Manufacturer: Microchip Technology

📥 Download Datasheet

General Description

The Microchip MIC33M356 is a I2C programmable, high-efficiency, low-voltage input, 3A current, synchronous step-down regulator power module with integrated inductor.

The Constant On-Time (COT) control architecture with HyperLight Load® mode provides very high efficiency at light loads, while still having ultra-fast transient response.

The I2C interface allows programming the output voltage between 0.6V and 1.28V, with 5 mV resolution or between 0.6V and 3.84V, with 10 mV and 20 mV resolution.

Overview

MIC33M356 3A, Power Module Buck Converter with HyperLight Load® Mode and I2C.

Key Features

  • Input Voltage Range: 2.4V to 5.5V.
  • 3A Output Current.
  • Multiple Faults Indication through I2C.
  • I2C Programmable: - Output voltage: 0.6V to 1.28V at 5 mV resolution or 0.6V to 3.84V, 10 and 20 mV resolution - Slew rate: 0.2 ms/V to 3.2 ms/V - On-time (switching frequency) - High-side current limit: 3.5A or 5A - Enable delay: 0.2 ms-3 ms - Output discharge when disabled (EN = GND).
  • High Efficiency (up to 95%).
  • Ultra-Fast Transient Response.

More Datasheets from Microchip Technology

Part Number Description
MIC33M350 Pin Strapping Power Module
MIC33M650 Pin Strapping Power Module
MIC33M656 Power Module Buck Converter
MIC33050 4MHz Internal Inductor PWM Buck Power Module
MIC33153 4MHz 1.2A Internal Inductor PWM Buck Regulator
MIC3172 1.25A Switching Regulators
MIC38300A Ultra-Low Noise 3A Power Module
MIC38C42 BiCMOS Current-Mode PWM Controllers
MIC38C43 BiCMOS Current-Mode PWM Controllers
MIC38C44 BiCMOS Current-Mode PWM Controllers