SST26VF032BEUI
Features
- Factory-Programmed with EUI-48 and EUI-64 Globally Unique Identifier
- Secure, read-only access in Serial Flash Discoverable Parameter (SFDP) table
- Single Voltage Read and Write Operations
- 2.7-3.6V or 2.3-3.6V
- Serial Interface Architecture
- Nibble-wide multiplexed I/O’s with SPI-like serial mand structure
- Mode 0 and Mode 3
- x1/x2/x4 Serial Peripheral Interface (SPI) Protocol
- High Speed Clock Frequency
- 2.7-3.6V: 104 MHz max
- 2.3-3.6V: 80 MHz max
- Burst Modes
- Continuous linear burst
- 8/16/32/64 Byte linear burst with wrap-around
- Superior Reliability
- Endurance: 100,000 Cycles (min)
- Greater than 100 years Data Retention
- Low Power Consumption:
- Active Read current: 15 m A (typical @ 104 MHz)
- Standby Current: 15 µA (typical)
- Fast Erase Time
- Sector/Block Erase: 18 ms (typ), 25 ms (max)
- Chip Erase: 35 ms (typ), 50 ms (max)
- Page-Program
- 256 Bytes per page in x1 or x4 mode
- End-of-Write Detection
- Software polling the BUSY bit in status...
