1N6358 - 1500 Watt Low Clamping Factor Transient Voltage Suppressor
Microsemi (now Microchip Technology)
General Description
This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices.
Key Features
Screening in reference to MIL-PRF-19500
available.
Unidirectional and bidirectional TVS series in axial package for thru-hole mounting.
Suppresses transients up to 1500 watts @ 10/1000 µs (see figure 1).
tclamping (0 volts to V(BR) min):
Unidirectional.
Less than 100 picoseconds. Bidirectional.
Less than 5 nanoseconds.
Working voltage (VWM) range 10 V to 45 V.
Low clamping factor (ratio of actual VC/VBR): 1.33 @ full rated powe.
Full PDF Text Transcription for 1N6358 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
1N6358. For precise diagrams, and layout, please refer to the original PDF.
1N6358 – 1N6372 or MPT-10 – MPT-45C Available 1500 Watt Low Clamping Factor Transient Voltage Suppressor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N...
View more extracted text
ssor DESCRIPTION This Transient Voltage Suppressor (TVS) series for 1N6358 through 1N6372 are JEDEC registered selections for both unidirectional and bidirectional devices. The 1N6358 through 1N6364 are unidirectional and the 1N6366 through 1N6372 are bidirectional where they all provide a very low specified clamping factor for minimal clamping voltages (VC) above their respective breakdown voltages (VBR) as specified herein. They are most often used in protecting sensitive components from inductive switching transients or induced secondary lightning effects as found in lower surge levels of IEC61000-4-5.