Datasheet4U Logo Datasheet4U.com

XM1002 - GaAs MMIC Image Reject Mixer

General Description

Mimix Broadband’s 34.0-46.0 GHz GaAs MMIC fundamental image reject mixer can be used as an up- or down-converter.

The device has a conversion loss of 7.0 dB with a 20.0 dB image rejection across the band.

Key Features

  • Fundamental Image Reject Mixer 7.0 dB Conversion Loss 20.0 dB Image Rejection +24 dBm Input Third Order Intercept 100% On-Wafer RF Testing 100% Visual Inspection to MIL-STD-883 Method 2010 General.

📥 Download Datasheet

Datasheet Details

Part number XM1002
Manufacturer Mimix Broadband
File Size 346.99 KB
Description GaAs MMIC Image Reject Mixer
Datasheet download datasheet XM1002 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XM1002-BD Image Reject Mixer MA-COM
XM1001-BD Image Reject Mixer MA-COM
XM1003-BD Image Reject Mixer MACOM
XM105J R. F. Molded Chokes ETC
XM116 Diode Protected N-Channel Enhancement Mode MOSFET General Purpose Amplifier Calogic LLC

Other Datasheets by Mimix Broadband

Part Number Description
XM1000 GaAs MMIC Balanced Mixer
XM1001 GaAs MMIC Image Reject Mixer
XM1001-QH GaAs MMIC Image Reject Mixer
XM1003-BD GaAs MMIC Image Reject Mixer
XM1004-BD GaAs MMIC Balanced Mixer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
34.0-46.0 GHz GaAs MMIC Image Reject Mixer December 2005 - Rev 02-Dec-05 M1002 Chip Device Layout Features Fundamental Image Reject Mixer 7.0 dB Conversion Loss 20.0 dB Image Rejection +24 dBm Input Third Order Intercept 100% On-Wafer RF Testing 100% Visual Inspection to MIL-STD-883 Method 2010 General Description Mimix Broadband’s 34.0-46.0 GHz GaAs MMIC fundamental image reject mixer can be used as an up- or down-converter. The device has a conversion loss of 7.0 dB with a 20.0 dB image rejection across the band. I and Q mixer outputs are provided and an external 90 degree hybrid is required to select the desired sideband. This MMIC uses Mimix Broadband’s 0.