900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Mimix Broadband

XU1000 Datasheet Preview

XU1000 Datasheet

GaAs MMIC Transmitter

No Preview Available !

17.0-27.0 GHz GaAs MMIC
Transmitter
May 2005 - Rev 13-May-05
U1000
Features
Fundamental Transmitter
Low DC Power Consumption
Optional Power Bias Configuration
0.0 dB Conversion Gain
+12.0 dBm Third Order Intercept (IIP3)
100% On-Wafer RF and DC Testing
100% Visual Inspection to MIL-STD-883
Method 2010
Chip Device Layout
General Description
Mimix Broadbands 17.0-27.0 GHz GaAs MMIC
transmitter has a small signal conversion gain of 0.0
dB with a third order intercept of +12.0 dBm across
the band.The device is a single fundamental mixer
followed by a single stage amplifier.This MMIC uses
Mimix Broadbands 0.15 µm GaAs PHEMT device
model technology, and is based upon electron beam
lithography to ensure high repeatability and
uniformity.The chip has surface passivation to protect
and provide a rugged part with backside via holes
and gold metallization to allow either a conductive
epoxy or eutectic solder die attach process.This
device is well suited for Millimeter-wave Point-to-
Point Radio, LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id)
Gate Bias Voltage (Vg)
Input Power (IF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+6.0 VDC
50 mA
+0.3 VDC
+10 dBm
-65 to +165 OC
-55 to MTTF Table3
MTTF Table3
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz 17.0 - 27.0
Frequency Range (RF) Lower Side Band
GHz 17.0 - 27.0
Frequency Range (LO)
GHz 15.0 - 29.0
Frequency Range (IF)
GHz DC - 2.0
Output Return Loss RF (S22)
dB - 7.0 -
Input Return Loss LO (S11)
dB - 8.0 -
Small Signal Conversion Gain IF/RF (S21)
dB - 0.0 -
LO Input Drive (PLO)
dBm - +12.0 -
Isolation LO/RF
dB - 10.0 -
Input Power for 1 dB Compression (P1dB)1,2
Input Third Order Intercept (IIP3)1,2
dBm - +2.0 -
dBm - +12.0 -
Drain Bias Voltage (Vd)
VDC - +3.0 +5.5
Gate Bias Voltage (Vg)
VDC -1.0 -0.5 0.0
Supply Current (Id) (Vd=3.0V, Vg=-0.5V Typical)
mA - 23 46
(1) Optional power bias Vd=5.5V, Id=45mA will typically yield improved P1dB.
(2) Measured using constant current.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.




Mimix Broadband

XU1000 Datasheet Preview

XU1000 Datasheet

GaAs MMIC Transmitter

No Preview Available !

17.0-27.0 GHz GaAs MMIC
Transmitter
May 2005 - Rev 13-May-05
Mechanical Drawing
2.500
(0.098)
1.961
(0.077)
2
1.613
(0.064)
3
2.212
(0.087)
4
U1000
5
1.158
(0.046)
1
0.0
0.0 0.391
(0.015)
2.660
(0.105)
(Note: Engineering designator is 25KTX_05N3)
Units: millimeters (inches) Bond pad dimensions are shown to center of bond pad.
Thickness: 0.110 +/- 0.010 (0.0043 +/- 0.0004), Backside is ground, Bond Pad/Backside Metallization: Gold
All Bond Pads are 0.100 x 0.100 (0.004 x 0.004).
Bond pad centers are approximately 0.109 (0.004) from the edge of the chip.
Dicing tolerance: +/- 0.005 (+/- 0.0002). Approximate weight: 4.124 mg.
Bond Pad #1 (LO)
Bond Pad #2 (IF)
Bond Pad #3 (Vg)
Bond Pad #4 (Vd)
Bond Pad #5 (RF Out)
Bias Arrangement
Vg
Vd
Bypass Capacitors - See App Note [2]
Vg Vd
IF 2
34
5 RF Out
IF
RF
1
LO
LO
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.


Part Number XU1000
Description GaAs MMIC Transmitter
Maker Mimix Broadband
Total Page 5 Pages
PDF Download

XU1000 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 XU1000 GaAs MMIC Transmitter
Mimix Broadband
2 XU1001 GaAs MMIC Transmitter
Mimix Broadband
3 XU1002 GaAs MMIC Transmitter
Mimix Broadband
4 XU1002-QD GaAs Transmitter
Mimix Broadband
5 XU1003 GaAs MMIC Transmitter
Mimix Broadband
6 XU1003-QD GaAs Transmitter
Mimix Broadband
7 XU1004 GaAs MMIC Transmitter
Mimix Broadband
8 XU1005-BD GaAs MMIC Transmitter
Mimix Broadband
9 XU1005-QD GaAs Transmitter
Mimix Broadband





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy