Datasheet4U Logo Datasheet4U.com

RA45H4452M - RoHS Compliance

General Description

The RA45H4452M is a 45-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 440- to 520-MHz range.

The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors.

Key Features

  • Enhancement-Mode MOSFET Transistors (IDD≅0 @ VDD=12.5V, VGG=0V).
  • Pout>45W, ηT>35% @ VDD=12.5V, VGG=5V, Pin=50mW.
  • Broadband Frequency Range: 440-520MHz.
  • Low-Power Control Current IGG=1mA (typ) at VGG=5V www. DataSheet4U. com.
  • Module Size: 66 x 21 x 9.88 mm.
  • Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output power with the input power 2 3 1 4 5 1 2 3 4 5 RF Input (Pin) Gate.

📥 Download Datasheet

Full PDF Text Transcription for RA45H4452M (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for RA45H4452M. For precise diagrams, and layout, please refer to the original PDF.

MITSUBISHI RF MOSFET MODULE ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS RA45H4452M BLOCK DIAGRAM RoHS Compliance , 440-520MHz 45W 12.5V, 3 Stage Amp. For ...

View more extracted text
LOCK DIAGRAM RoHS Compliance , 440-520MHz 45W 12.5V, 3 Stage Amp. For MOBILE RADIO DESCRIPTION The RA45H4452M is a 45-watt RF MOSFET Amplifier Module for 12.5-volt mobile radios that operate in the 440- to 520-MHz range. The battery can be connected directly to the drain of the enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output power and drain current increase as the gate voltage increases. With a gate voltage around 4V (minimum), output power and drain current increases substantially. The nomin

More Datasheets from Mitsubishi Electric

Part Number Description
RA45H4045MR 3 Stage Amp
RA45H7687M1 RoHS Compliance
RA45H8994M1 RoHS Compliance