MBR4045PT Datasheet | Motorola Semiconductor

features : - Dual Diode Construction - Terminals 1 and 3 May Be Connected for Parallel Operation at Full Rating - 45 Volt Blocking Voltage - Low Forward Voltage Drop - Guardring for Stress Protection and High dv/dt Capability (> 10 V/ns) - Guaranteed Reverse Avalanche - 150°C Operating Junction Temperature Mechanical Characteristics - Case: Epoxy, Molded - Weight: 4.3 grams (approximately) - Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable - Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds - Shipped 30 Units Per Plastic Tube - Marking: B4045 1 2,4 3 SCHOTTKY BARRIER RECTIFIER 40 AMPERES 45 VOLTS 1 2 3 CASE 340D- 02 MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current - Per Diode (Rated VR) @ TC = 125°C - Per Device Peak Repetitive Forward Current, Per Diode (Rated VR, Square Wave, 20 k Hz) @ TC = 90°C Non Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Peak Repetitive Reverse Current (2.0 µs, 1.0 k Hz) Operating Junction Temperature Storage Temperature Peak Surge Junction Temperature (Forward Current Applied) Voltage Rate of Change Symbol VRRM VRWM VR IF(AV) IFRM IFSM IRRM TJ Tstg TJ(pk) dv/dt Max 45 Unit Volt 20 40 40 400 2.0 - 65 to +150 - 65 to +175 175 10,000 Amp Amp Amp Amp °C °C °C V/µs THERMAL CHARACTERISTICS Thermal Resistance - Junction to Case RθJC 1.4 °C/W SWITCHMODE is a trademark of Motorola, Inc. This document contains information on a new product. Specifications and information herein are subject to change without notice. Rev 3 Rectifier Device Data © Motorola, Inc. 1996 ELECTRICAL CHARACTERISTICS Rating Instantaneous Forward Voltage (1) @ IF = 20 Amps, TC = 25°C @ IF = 20 Amps, TC = 125°C @ IF = 40 Amps, TC = 25°C @ IF = 40 Amps, TC = 125°C Instantaneous Reverse Current (1) @ Rated DC Voltage, TC = 25°C @ Rated DC Voltage,...