MBRS1540T3 Datasheet | Motorola Semiconductor

Features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency switching power supplies; free wheeling diodes and polarity protection diodes. - - - - pact Package with J- Bend Leads Ideal for Automated Handling Highly Stable Oxide Passivated Junction Guardring for Over- Voltage Protection Low Forward Voltage Drop SCHOTTKY BARRIER RECTIFIER 1.5 AMPERES 40 VOLTS Mechanical Characteristics: - Case: Molded Epoxy - Epoxy Meets UL94, VO at 1/8″ - Weight: 95 mg (approximately) - Polarity: Notch in Plastic Body Indicates Cathode Lead - Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds - Available in 12 mm Tape, 2500 Units per 13″ Reel, Add “T3” Suffix to Part Number - Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable - Marking: BGJ MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 100°C) Peak Repetitive Forward Current (At Rated VR, Square Wave, 100 k Hz, TC = 105°C) Non- Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Storage / Operating Case Temperature Operating Junction Temperature Voltage Rate of Change (Rated VR, TJ = 25°C) Symbol VRRM VRWM VR IO IFRM IFSM Tstg, TC TJ dv/dt Value 40 CASE 403A- 03 SMB Unit Volts 1.5 3.0 40 - 55 to +150 - 55 to +125 10,000 Amps Amps Amps °C °C V/ms °C/W THERMAL CHARACTERISTICS Thermal Resistance - Junction- to- Lead (2) Thermal Resistance - Junction- to- Ambient (2) RθJL RθJA TJ = 25°C 0.46 0.54 IR (VR = 40 V) (VR = 20 V) TJ = 25°C 0.8 0.1 24 80 ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1) see Figure 2 Maximum Instantaneous Reverse Current see Figure 4 (IF = 1.5 A) (IF = 3.0 A) VF TJ = 125°C 0.39 0.54 TJ = 100°C 5.7 1.6 m A Volts This document contains information on a new product. Specifications and...