MC14LC5480 - 5 V PCM Codec-Filter

Motorola Semiconductor (now NXP Semiconductors)

Datasheet Details

Part number	MC14LC5480
Manufacturer	Motorola Semiconductor (now NXP Semiconductors)
File Size	276.35 KB
Description	5 V PCM Codec-Filter
Datasheet	MC14LC5480 Datasheet

Overview

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MC14LC5480/D Advance Information 5 V PCM Codec-Filter The MC14LC5480 is a general purpose per channel PCM Codec–Filter with pin.

Key Features

This allows input signals that are referenced to the V SS pin to be level shifted to the VAG pin with minimum noise. This pin may be connected to the VAG pin for an inverting amplifier configuration if the input signal is already referenced to the VAG pin. The common mode range of the TI+ and TI.
pins is from 1.2 V, to V DD minus 2 V. This is an FET gate input. Connecting the TI+ pin to V DD will place this am- plifier’s output (TG) into a high.
impedance state, thus allowing the.

More Datasheets from Motorola Semiconductor (now NXP Semiconductors)

Part Number	Description
MC14LC5480	5 V PCM Codec-Filter
MC14LC5436A	Low Power Dual Tone Multiple Frequency Receiver
MC14LC5447	Calling Line Identification(CLID) Receiver with Ring Detector
MC14LC5447	Calling Line Identification(CLID) Receiver with Ring Detector
MC14LC5002	72-Segment / 128-Segment LCD Drivers
MC14LC5003	(MC14LC5003 / MC14LC5004) 128 Segment LCD Drivers
MC14LC5003	(MC14LC5003 / MC14LC5004) 128 Segment LCD Drivers
MC14LC5003	72-Segment / 128-Segment LCD Drivers
MC14LC5004	(MC14LC5003 / MC14LC5004) 128 Segment LCD Drivers
MC14LC5004	(MC14LC5003 / MC14LC5004) 128 Segment LCD Drivers