No part of this document shall be copied in any form or by any means without the prior written consent
of NEC Corporation.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other
intellectual property rights of third parties by or arising from use of a product described herein or any
other liability arising from use of such application. No license, express, implied or otherwise, is granted
under any patents, copyrights or other intellectual property rights of NEC Corporation or of others.
While NEC Corporation has been making continuous effort to enhance the reliability of its products, the
possibility of failures cannot be eliminated entirely. To minimize risks of damage to property or injury to
person arising from a failure in an NEC product, customers must incorporate sufficient safety measures
in their design, such as redundancy, fire-containment and anti-failure features.
NEC products are classified into the following three quality grades:
"Standard", "Special", "Specific"
The "Specific" quality grade applies only to applications developed based on a customer designated
"quality assurance program" for a specific application. The recommended applications of a product
depend on its quality grade, as indicated below. Customers must check the quality grade of each
application before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically
designed for life support)
Specific: Military systems, aircraft, aerospace equipment, submersible repeaters, nuclear reactor control
systems, life support systems (medical equipment, etc.) and any other equipment
The quality grade of this product is "Standard" unless otherwise specified in this document. If
customers intend to use this product for applications other than those specified for "Standard" quality
grade, they should contact NEC Corporation sales representative in advance.
Anti-radioactive design is not implemented in this product.
PRELIMINARY DATA SHEET DOD-M-1316 (1st edition)
Datasheet pdf - http://www.DataSheet4U.net/