33907 Datasheet | NXP Semiconductors

features , with multiple fail-safe outputs, being a full part of a safety oriented system partitioning, to reach a high integrity safety level (up to ASIL D). The built-in enhanced high-speed CAN interface fulfills the ISO11898-2 and -5 standards. The LIN interface fulfills LIN protocol specifications 1.3, 2.0, 2.1, 2.2, and SAEJ2602-2 Features - Battery voltage sensing & MUX output pin - Highly flexible SMPS pre-regulator, allowing two topologies: non-inverting buck-boost and standard buck - Switching mode power supply (SMPS) dedicated to MCU core supply, from 1.2 V to 3.3 V delivering up to 1.5 A - Multiple wake-up sources in low-power mode: CAN, LIN, and/or IOs - Six configurable I/Os - Linear voltage regulator dedicated to auxiliary functions, or to a sensor supply (VCCA tracker or independent), 5.0 V or 3.3 V - Linear voltage regulator dedicated to MCU A/D reference voltage or I/Os supply (VCCA), 5.0 V or 3.3 V POWER SYSTEM BASIS CHIP AE SUFFIX (PB-FREE) 98ASA00173D 48-PIN LQFP-EP Applications - Electrical power steering - Engine management - Battery management - Active suspension - Gear box - Transmission - Electrical vehicle (EV), hybrid electrical vehicle (HEV), and inverter - Advanced driver assistance systems +Battery (KL30) VSUP3 VSENSE VAUX Ignition Key (KL15) CAN BUS VSUP3 VAUX_E VAUX_B VAUX SELECT CAN-5V IO_0 IO_1 IO_2 IO_3 IO_4 IO_5 CANH CANL LIN BUS LIN BOOTS_CORE SW_CORE...