Datasheet4U Logo Datasheet4U.com

74LVC157A-Q100 - Quad 2-input multiplexer

Description

The 74LVC157A-Q100 is a quad 2-input multiplexer which select four bits of data from two sources under the control of a common select input (S).

The four outputs present the selected data in the true (non-inverted) form.

The enable input (E) is active LOW.

📥 Download Datasheet

📁 Similar Datasheet

  • 74LVC157A-Q100 - Quad 2-input multiplexer (nexperia)
  • 74LVC157A - Quad 2-input multiplexer (Philips)
  • 74LVC157A - Quad 2-input multiplexer (nexperia)
  • 74LVC157AD - Quad 2-input multiplexer (nexperia)
  • 74LVC157 - Quad 2-Input Multiplexer (SG Micro)
  • 74LVC10 - Triple 3-input NAND gate (Philips)
  • 74LVC109 - Dual JK flip-flop (Philips)
  • 74LVC10A - Triple 3-input NAND gate (Philips)
  • 74LVC10A - Triple 3-input NAND gate (nexperia)
  • 74LVC10D - Triple 3-input NAND gate (Philips)
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
74LVC157A-Q100 Quad 2-input multiplexer Rev. 2 — 2 May 2013 Product data sheet 1. General description The 74LVC157A-Q100 is a quad 2-input multiplexer which select four bits of data from two sources under the control of a common select input (S). The four outputs present the selected data in the true (non-inverted) form. The enable input (E) is active LOW. When pin E is HIGH, all of the outputs (1Y to 4Y) are forced LOW regardless of all the other input conditions. Moving the data from two groups of registers to four common output buses is a common use of the 74LVC157A-Q100. The state of the common data select input (S) determines the particular register from which the data comes. It can also be used as function generator.
Published: |