900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

ICM7555CD Datasheet

General purpose CMOS timer

No Preview Available !

ICM7555
General purpose CMOS timer
Rev. 02 — 3 August 2009
Product data sheet
1. General description
The ICM7555 is a CMOS timer providing significantly improved performance over the
standard NE/SE555 timer, while at the same time being a direct replacement for those
devices in most applications. Improved parameters include low supply current, wide
operating supply voltage range, low THRESHOLD, TRIGGER, and RESET currents, no
crowbarring of the supply current during output transitions, higher frequency performance
and no requirement to decouple CONTROL_VOLTAGE for stable operation.
The ICM7555 is a stable controller capable of producing accurate time delays or
frequencies.
In the one-shot mode, the pulse width of each circuit is precisely controlled by one
external resistor and capacitor. For astable operation as an oscillator, the free-running
frequency and the duty cycle are both accurately controlled by two external resistors and
one capacitor. Unlike the NE/SE555 device, the CONTROL_VOLTAGE terminal need not
be decoupled with a capacitor. The TRIGGER and RESET inputs are active LOW. The
output inverter can source or sink currents large enough to drive TTL loads or provide
minimal offsets to drive CMOS loads.
2. Features
I Exact equivalent in most applications for NE/SE555
I Low supply current: 80 µA (typical)
I Extremely low trigger, threshold, and reset currents: 20 pA (typical)
I High-speed operation: 500 kHz guaranteed
I Wide operating supply voltage range guaranteed 3 V to 16 V over full automotive
temperatures
I Normal reset function; no crowbarring of supply during output transition
I Can be used with higher-impedance timing elements than the NE/SE555 for longer
time constants
I Timing from microseconds through hours
I Operates in both astable and monostable modes
I Adjustable duty cycle
I High output source/sink driver can drive TTL/CMOS
I Typical temperature stability of 0.005 % / °C at 25 °C
I Rail-to-rail outputs


NXP Semiconductors Electronic Components Datasheet

ICM7555CD Datasheet

General purpose CMOS timer

No Preview Available !

NXP Semiconductors
ICM7555
General purpose CMOS timer
3. Applications
I Precision timing
I Pulse generation
I Sequential timing
I Time delay generation
I Pulse width modulation
I Pulse position modulation
I Missing pulse detector
4. Ordering information
Table 1. Ordering information
Type number Temperature range Package
Name Description
ICM7555CD
ICM7555ID
ICM7555CN
ICM7555IN
Tamb = 0 °C to +70 °C SO8
Tamb = 40 °C to +85 °C
Tamb = 0 °C to +70 °C DIP8
Tamb = 40 °C to +85 °C
plastic small outline package; 8 leads; body width 3.9 mm
plastic dual in-line package; 8 leads (300 mil)
Version
SOT96-1
SOT97-1
5. Functional diagram
flip-flop
VDD
RESET
8
4
THRESHOLD
CONTROL_VOLTAGE
6
5
TRIGGER 2
R
comparator A
R
comparator B
R
1
GND
output
drivers
3 OUTPUT
DISCHARGE
7
N
1
GND
002aae403
Remark: Unused inputs should be connected to appropriate voltage from Table 3.
Fig 1. Functional diagram
ICM7555_2
Product data sheet
Rev. 02 — 3 August 2009
© NXP B.V. 2009. All rights reserved.
2 of 22


Part Number ICM7555CD
Description General purpose CMOS timer
Maker NXP
PDF Download

ICM7555CD Datasheet PDF






Similar Datasheet

1 ICM7555CD General purpose CMOS timer
NXP
2 ICM7555CN General purpose CMOS timer
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy