LPC11E37 Overview
LPC11E3x 32-bit ARM Cortex-M0 microcontroller; up to 128 kB flash; up to 12 kB SRAM and 4 kB EEPROM; USART Rev. 2.3 — 11 September 2014 Product data sheet 1. General The LPC11E3x are an ARM Cortex-M0 based, low-cost 32-bit MCU, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size pared to existing 8/16-bit architectures. The LPC11E3x...
LPC11E37 Key Features
- System
- ARM Cortex-M0 processor, running at frequencies of up to 50 MHz
- ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC)
- Non Maskable Interrupt (NMI) input selectable from several input sources
- System tick timer
- Memory
- Up to 128 kB on-chip flash program memory with sector (4 kB) and page erase (256 byte) access
- 4 kB on-chip EEPROM data memory; byte erasable and byte programmable; on-chip API support
- 12 kB SRAM data memory
- 16 kB boot ROM
LPC11E37 Applications
- System: ARM Cortex-M0 processor, running at frequencies of up to 50 MHz. ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC). Non Maskable
- Memory: Up to 128 kB on-chip flash program memory with sector (4 kB) and page erase (256 byte) access. 4 kB on-chip EEPROM data memory; byte erasable and by
- Debug options: Standard JTAG (Joint Test Action Group) test interface for BSDL (Boundary Scan Description Language). Serial Wire Debug
- Digital peripherals: Up to 54 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, repeater mode, and open-drain mode. Up to 8 GPI
- Analog peripherals: 10-bit ADC with