Datasheet4U Logo Datasheet4U.com

LPC844 - 32-bit Arm Cortex-M0+ microcontroller

This page provides the datasheet information for the LPC844, a member of the LPC845 32-bit Arm Cortex-M0+ microcontroller family.

Datasheet Summary

Description

The LPC84x are an Arm Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz.

The LPC84x support up to 64 KB of flash memory and 16 KB of SRAM.

Features

  • System:.
  • Arm Cortex-M0+ processor (revision r0p1), running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.
  • Arm Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).
  • System tick timer.
  • AHB multilayer matrix.
  • Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported.
  • Micro Trace Buffer (MTB).
  • Memory:.
  • Up to 64 KB on-chip flash programming memory.

📥 Download Datasheet

Datasheet preview – LPC844

Datasheet Details

Part number LPC844
Manufacturer NXP
File Size 3.88 MB
Description 32-bit Arm Cortex-M0+ microcontroller
Datasheet download datasheet LPC844 Datasheet
Additional preview pages of the LPC844 datasheet.
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
LPC84x 32-bit Arm® Cortex®-M0+ microcontroller; up to 64 KB flash and 16 KB SRAM; FAIM memory; 12-bit ADC; 10-bit DACs; Comparator; Capacitive Touch Interface Rev. 2.1 — 28 October 2020 Product data sheet 1. General description The LPC84x are an Arm Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC84x support up to 64 KB of flash memory and 16 KB of SRAM.
Published: |