Datasheet4U Logo Datasheet4U.com

LPC802 - 32-bit ARM Cortex-M0+ microcontroller

Description

The LPC802 is an ARM Cortex-M0+ based, low-cost 32-bit MCU family of processors operating at CPU frequencies of up to 15 MHz.

The LPC802 supports 16 KB of flash memory and 2 KB of SRAM.

Features

  • System:.
  • ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 15 MHz with single-cycle multiplier and fast single-cycle I/O port.
  • ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).
  • System tick timer.
  • AHB multilayer matrix.
  • Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported.
  • Memory:.
  • 16 KB on-chip EEPROM based flash programming memory.
  • Code Read Protecti.

📥 Download Datasheet

Datasheet preview – LPC802

Datasheet Details

Part number LPC802
Manufacturer NXP Semiconductors
File Size 3.38 MB
Description 32-bit ARM Cortex-M0+ microcontroller
Datasheet download datasheet LPC802 Datasheet
Additional preview pages of the LPC802 datasheet.
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
LPC802 32-bit ARM Cortex-M0+ microcontroller; up to 16 KB flash and 2 KB SRAM; 12-bit ADC; Comparator; Rev. 1.8 — 25 September 2019 Product data sheet 1. General description The LPC802 is an ARM Cortex-M0+ based, low-cost 32-bit MCU family of processors operating at CPU frequencies of up to 15 MHz. The LPC802 supports 16 KB of flash memory and 2 KB of SRAM. The peripheral complement of the LPC802 includes one I2C-bus interface, up to two USARTs, one SPI interface, one multi-rate timer, self-wake-up timer, one general purpose 32-bit counter/timer, one 12-bit ADC, one analog comparator, function-configurable I/O ports through a switch matrix, and up to 17 general-purpose I/O pins. For additional documentation related to the LPC802 parts, see Section 19 “References”. 2.
Published: |