MC33904 Datasheet PDF - NXP SBC Gen2 Specs

MC33904 - SBC Gen2

This page provides the datasheet information for the MC33904, a member of the MC33903 SBC Gen2 family.

Datasheet Summary

Description

32 6.1.

Features

and enhances present module designs. The device works as an advanced power management unit for the MCU with additional integrated circuits such as sensors and CAN transceivers. It has a built-in enhanced high-speed CAN interface (ISO11898-2 and -5) with local and bus failure diagnostics, protection, and fail-safe operation modes. The SBC may include zero, one or two LIN 2.1 interfaces with LIN output pin switches. It includes up to four wake-up input pins that can also be configured as output dr.

Datasheet Details

Part number	MC33904
Manufacturer	NXP
File Size	2.75 MB
Description	SBC Gen2
Datasheet	MC33904 Datasheet
Additional preview pages of the MC33904 datasheet.

📁 Similar Datasheet

MC33901 - High-speed CAN Transceiver (Freescale Semiconductor)

MC33902 - High Speed CAN Interface (Motorola)

MC33912 - LIN transceiver (Freescale Semiconductor)

MC3392 - LOW SIDE PROTECTED SWITCH (Motorola)

MC33926 - 5.0A Throttle Control H-Bridge (Freescale Semiconductor)

MC33927 - Three-Phase Field Effect Transistor Pre-Driver (Freescale Semiconductor)

MC33931 - 5.0A Throttle Control H-bridge (Freescale Semiconductor)

MC33932 - 5.0A Throttle Control H-Bridge (Freescale Semiconductor)

MC33941 - Electric Field Imaging Device (Freescale Semiconductor)

MC33970 - Dual Gauge Driver (Freescale Semiconductor)

Full PDF Text Transcription

Click to expand full text

NXP Semiconductors Data Sheet: Advance Information SBC Gen2 with CAN high speed and LIN interface Document Number: MC33903_4_5 Rev. 14.0, 2/2018 333990033/4//5 The 33903/4/5 is the second generation family of the System Basis Chip (SBC). It combines several features and enhances present module designs. The device works as an advanced power management unit for the MCU with additional integrated circuits such as sensors and CAN transceivers. It has a built-in enhanced high-speed CAN interface (ISO11898-2 and -5) with local and bus failure diagnostics, protection, and fail-safe operation modes. The SBC may include zero, one or two LIN 2.1 interfaces with LIN output pin switches. It includes up to four wake-up input pins that can also be configured as output drivers for flexibility.

Published: Jul 17, 2020 |