MKM33Z64ACLL5 Datasheet | NXP Semiconductors

Features - Operating Characteristics - Voltage range: 1.71 V to 3.6 V (when Analog Front End (AFE) is not used) - Voltage range: 2.7 V to 3.6 V (when Analog Front End (AFE) is used) - i RTC battery supply voltage range: 1.71 to 3.6 V - Flash write voltage range: 1.71 to 3.6 V - Temperature range (ambient): -40°C to 85°C - Performance - Up to 50 MHz ARM Cortex-M0+ core delivering 0.95 Dhrystone MIPS per MHz - Memories and memory interfaces - 128/64 KB program flash memory. There is no Flex Memory on these devices - 16 KB of single access RAM - Clocks - 1 to 32 MHz crystal oscillator - 32 k Hz crystal oscillator - Multi-purpose clock generator - System peripherals - Multiple low-power modes to provide power optimization based on application requirements - Memory protection unit with multi-master protection - 4-channel DMA controller, supporting up to 64 request sources - External watchdog monitor - Robust watchdog monitor - Low-leakage wakeup unit - Asynchronous wakeup unit - Peripheral Crossbar (allows internal signals to be connected to other on-chip modules) MKMxx Zxx ACxx5 - Security and integrity modules - Hardware programmable CRC module to support fast cyclic redundancy checks - Hardware random-number generator - 128-bit unique identification (ID) number per chip - Human-machine interface - Segment LCD controller supporting up to 36 frontplanes and 8 backplanes or 40 frontplanes and 4 backplanes - General-purpose input/output which can acts as Rapid GPIO (single cycle access) - Analog modules - 16-bit SAR ADC - 24-bit Analog Front End prising of 24-bit Sigma Delta ADCs (after averaging) - Programmable Gain Amplifier (PGA with gains upto 32) - Two analog parators (CMP) containing a 6-bit DAC and programmable reference input - 1.2V Voltage reference -...