NTS0101 Datasheet PDF (Dual supply translating transceiver)

NTS0101 - Dual supply translating transceiver

Description

The NTS0101 is a 1-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation.

Features

Wide supply voltage range:.
VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V.
Maximum data rates:.
Push-pull: 50 Mbps.
IOFF circuitry provides partial Power-down mode operation.
Inputs accept voltages up to 5.5 V.
ESD protection:.
HBM JESD22-A114E Class 2 exceeds 2500 V for A port.
HBM JESD22-A114E Class 3B exceeds 8000 V for B port.
MM JESD22-A115-A exceeds 200 V.
CDM JESD22-C101E exceeds 1500 V.
Latch-up performance exceeds 100 mA.

Datasheet Details

Part number	NTS0101
Manufacturer	NXP
File Size	170.21 KB
Description	Dual supply translating transceiver
Datasheet	NTS0101 Datasheet
Additional preview pages of the NTS0101 datasheet.

📁 Similar Datasheet

NTS0104 - Dual supply translating transceiver (NXP Semiconductors)

NTS-3000 - Network Time Synchronisation USER MANUAL (ELPROMA)

NTS10100EMFS - Very Low Leakage Trench-based Schottky Rectifier (ON Semiconductor)

NTS10100EMFST1G - Very Low Leakage Trench-based Schottky Rectifier (ON Semiconductor)

NTS10100EMFST3G - Very Low Leakage Trench-based Schottky Rectifier (ON Semiconductor)

NTS10100MFS - Very Low Forward Voltage Trench-based Schottky Rectifier (ON Semiconductor)

NTS10100MFST1G - Very Low Forward Voltage Trench-based Schottky Rectifier (ON Semiconductor)

NTS10100MFST3G - Very Low Forward Voltage Trench-based Schottky Rectifier (ON Semiconductor)

NTS10120EMFS - Very Low Leakage Trench-based Schottky Rectifier (ON Semiconductor)

NTS10120EMFST1G - Very Low Leakage Trench-based Schottky Rectifier (ON Semiconductor)

Full PDF Text Transcription

Click to expand full text

NTS0101 Dual supply translating transceiver; open drain; auto direction sensing Rev. 5 — 11 August 2014 Product data sheet 1. General description The NTS0101 is a 1-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 1-bit input-output ports (A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V. VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B).

Published: Jan 31, 2016 |