NTS0308E Datasheet | NXP Semiconductors

description The NTS0308E is an 8-bit, dual supply translating transceiver family with auto direction sensing, that enables bidirectional voltage level translation. It features eight 1-bit inputoutput ports (A and B), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 0.95 V and 3.6 V. VCC(B) can be supplied at any voltage between 1.65 V and 5.5 V. This flexibility makes the device suitable for translating between any of the voltage nodes (0.95 V, 1.2 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). VCC(A) must be ≤ VCC(B) to ensure proper operation. Pins A and OE are referenced to VCC(A) and pin B is referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. 2 Features and benefits - Wide supply voltage range: - VCC(A): 0.95 V to 3.6 V and VCC(B): 1.65 V to 5.5 V; VCC(A) must be ≤ VCC(B) - No power-sequencing required - Maximum data rate - Open-drain: 2 Mbps - Push-pull: 20 Mbps - Longer one-shot pulse for driving larger capacitive loads with much reduced ringing and overshoot - A-side and OE inputs accept voltages up to 3.6 V and are 3.6 V tolerant - B-side inputs accept voltages up to 5.5 V and are 5.5 V tolerant - ESD protection: - IEC 61000-4-2 Class 4, 8 k V contact for B-side port - HBM JESD22-A114E Class 2 exceeds 2000 V for both ports - CDM JESD22-C101E exceeds 1000 V for both ports - Latch-up performance exceeds 100 m A per JESD 78B Class II - Package options: TSSOP20 - Specified from -40 °C to +125 °C 3 Applications - I2C/SMBus, UART - GPIO NXP Semiconductors 8-bit dual supply translating transceiver; open drain; auto direction sensing 4 Ordering information Table 1. Ordering information Type number Topside marking Package Name NTS0308EPW Line A: NTS0308 TSSOP20 Line B: EPW Description Version plastic thin shrink small outline package; 20 leads; body SOT360-1 width 4.4 mm 4.1 Ordering options Table 2. Ordering options Type number Orderable...